Standard Test Methods for Rating Adhesion by Tape Test (2023)

ASTM License Agreement

IMPORTANT- READ THESE TERMS CAREFULLY BEFORE ENTERING THIS ASTM PRODUCT.
By purchasing a subscription and clicking through this agreement, you are entering into a contract, and acknowledge that you have read this License Agreement, that you understand it and agree to be bound by its terms. If you do not agree to the terms of this License Agreement, promptly exit this page without entering the ASTM Product.

1. Ownership:
This Product is copyrighted, both as a compilation and as individual standards, articles and/or documents ("Documents") by ASTM ("ASTM"), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 USA, except as may be explicitly noted in the text of the individual Documents. All rights reserved. You (Licensee) have no ownership or other rights in the ASTM Product or in the Documents. This is not a sale; all right, title and interest in the ASTM Product or Documents (in both electronic file and hard copy) belong to ASTM. You may not remove or obscure the copyright notice or other notice contained in the ASTM Product or Documents.

2. Definitions.

A. Types of Licensees:

(i) Individual User:
a single unique computer, with an individual IP address;

(ii) Single-Site:
one geographic location or to multiple sites within one city that are part of a single organization unit administered centrally; for example, different campuses of the same university within the same city administered centrally.

(iii) Multi-Site:
an organization or company with independently administered multiple locations within one city; or an organization or company located in more than one city, state or country, with central administration for all locations.

B. Authorized Users:
any individual who has subscribed to this Product; if a Site License, also includes registered students, faculty or staff member, or employee of the Licensee, at the Single or Multiple Site.

(Video) Tape Adhesion ASTM D3359 [Paint Testing]

3. Limited License.
ASTM grants Licensee a limited, revocable, nonexclusive, non-transferable license to access, by means of one or more authorized IP addresses, and according to the terms of this Agreement, to make the uses permitted and described below, each ASTM Product to which Licensee has subscribed.

A. Specific Licenses:

(i) Individual User:

(a) the right to browse, search, retrieve, display and view the Product;

(b) the right to download, store or print single copies of individual Documents, or portions of such Documents, solely for Licensee's own use. That is, Licensee may access and download an electronic file of a Document (or portion of a Document) for temporary storage on one computer for purposes of viewing, and/or printing one copy of a Document for individual use. Neither the electronic file nor the single hard copy print may be reproduced in anyway. In addition, the electronic file may not be distributed elsewhere over computer networks or otherwise. That is, the electronic file cannot be emailed, downloaded to disk, copied to another hard drive or otherwise shared. The single hard copy print may only be distributed to others for their internal use within your organization; it may not be copied. The individual Document downloaded may not otherwise be sold or resold, rented, leased, lent or sub-licensed.

(ii) Single-Site and Multi-Site Licenses:

(a) the right to browse, search, retrieve, display and view the Product;

(b) the right to download, store or print single copies of individual Documents, or portions of such Documents for the Authorized User's personal use, and to share such copies with other Authorized Users of Licensee within Licensee's computer network;

(c) if an educational institution, Licensee is permitted to provide a hard copy of individual Documents to individual students (Authorized Users) in a class at Licensee's location;

(Video) X cut method A, ASTM D3359

(d) the right to display, download and distribute hard copies of Documents for training Authorized Users or groups of Authorized Users.

(e) Licensee will undertake all necessary authentication and verification processes to ensure only Authorized Users can access the ASTM Product.

(f) Licensee will provide ASTM with a list of authorized IP (numeric IP domain addresses) addresses and, if Multi-Site, a list of authorized sites.

B. Prohibited Uses.

(i) This License describes all permitted uses. Any other use is prohibited, is a violation of this Agreement and can result in immediate termination of this License.

(ii) An Authorized User may not make this Product, or Documents, available to anyone other than another Authorized User, whether by Internet link, or by permitting access through his or her terminal or computer; or by other similar or dissimilar means or arrangements.

(iii) Specifically, no one is authorized to transmit, copy, or distribute any Document in any manner or for any purpose except as described in Section 3 of this License, without ASTM's prior express written permission. In particular, except as described in Section 3, no one may, without the prior express written permission of ASTM: (a) distribute or forward a copy (electronic or otherwise) of any article, file, or material obtained from any ASTM Product or Document; (b) reproduce or photocopy any standard, article, file, or material from any ASTM Product; (c) alter, modify, adapt, or translate any standard, article, file, or material obtained from any ASTM Product; (d) include any standard, article, file, or material obtained from any ASTM Product or Document in other works or otherwise create any derivative work based on any materials obtained from any ASTM Product or Document; (e) impose any charge for a copy (electronic or otherwise) of any standard,article, file, or material obtained from any ASTM Product or Document, except for normal printing/copying costs where such reproduction is authorized under Section 3; or (f) systematically download, archive, or centrally store substantial portions of standards, articles, files, or material obtained from any ASTM Product or Document. Inclusion of print or electronic copies in coursepacks or electronic reserves, or for distance learning use, is not authorized by this License and is prohibited without ASTM's prior written permission.

(iv) Licensee may not utilize the Product, or access to the Product, for commercial purposes, including but not limited to the sale of Documents, materials, fee-for-service use of the Product or bulk reproduction or distribution of Documents in any form; nor may Licensee impose special charges on Authorized Users for use of the Product beyond reasonable printing or administrative costs.

C. Copyright Notice. All copies of material from an ASTM Product must bear proper copyright notice in ASTM's name, as shown in the initial page of each standard, article, file or material. Obscuring, deletion or modification of the copyright notice is not permitted.

(Video) RT TechTips 11- Testing Adhesion with Tape

4. Detection of Prohibited Uses.

A. Licensee is responsible for taking reasonable measures to prevent prohibited uses, and promptly notify ASTM of any infringements of copyright or prohibited use of which Licensee becomes aware. Licensee will cooperate with ASTM in investigating any such prohibited uses and will take reasonable steps to ensure the cessation of such activity and to prevent any reoccurrence.

B. Licensee shall use all reasonable efforts to protect the Product from any use that is not permitted under this Agreement, and shall notify ASTM of any use of which it learns or is notified.

5. Continued Access to Product.
ASTM reserves the right to terminate this License, upon written notice, if Licensee materially breaches the terms of this Agreement. If Licensee fails to pay ASTM any license or subscription fees when due, ASTM will provide the Licensee with a 30-day period within which to cure such breach. No cure period will be provided for material breaches relating to violations of Section 3 or any other breach likely to cause ASTM irreparable harm. If Licensee's subscription to an ASTM Product terminates, further access to the online database will be denied.If Licensee or Authorized Users materially breach this License or make prohibited uses of material in any ASTM Product, ASTM reserves the right to deny Licensee any access to the ASTM Product, in ASTM's sole discretion.

6. Delivery Formats and Service.

A. Some ASTM Products use standard Internet HTML format. ASTM reserves the right to change such format upon three [3] months' notice to Licensee, although ASTM will make reasonable efforts to use commonly available formats. The Licensee and the Authorized Users are responsible for obtaining at their expense suitable Internet connections, Web browsers, and licenses for any software necessary to view the ASTM Products.

B. The ASTM Products are also available in Adobe Acrobat (PDF) format to Licensee and its Authorized Users, who are solely responsible for installing and configuring the appropriate Adobe Acrobat Reader software.

C. ASTM shall use reasonable efforts to make online access available on a continuous basis. Availability will be subject to periodic interruption and downtime for server maintenance, software installation or testing, loading new files, and reasons beyond the control of ASTM. ASTM does not guarantee access, and will not be liable for damages or refunds if the Product becomes unavailable temporarily, or if access becomes slow or incomplete due to system back-up procedures, Internet traffic volume, upgrades, overload of requests to servers, general network failures or delays, or any other cause that may from time to time make the Product unavailable for the Licensee or Licensee's Authorized Users.

7. Terms and Fees.

(Video) Paint Adhesion Test on Bare Metal

A. The term of this Agreement is _____________ ("Subscription Period"). Access to the Product is for the Subscription Period only. This Agreement will remain in effect thereafter for successive Subscription Periods so long as annual subscription fees, as such may change from time to time, are paid. Licensee and/or ASTM have the right to terminate this Agreement at the end of a Subscription Period by written notice given at least 30 days in advance.

B. Fees:

8. Verification.
ASTM has the right to verify compliance with this Agreement, at its expense, and at any time during the course of normal business hours. To do so, ASTM will engage an independent consultant, subject to a confidentiality agreement, to review Licensee's use of ASTM Product and/or Documents. Licensee agrees to permit access to its information and computer systems for this purpose. Verification will take place upon no less than 15 days notice, during normal business hours and in a manner that does not interfere unreasonably with Licensee's operations. If verification reveals unlicensed or prohibited use of the ASTM Products or Documents, Licensee agrees to reimburse ASTM for the costs incurred in verification and reimburse ASTM for any unlicensed/prohibited uses. By invoking this procedure, ASTM does not waive any of its rights to enforce this Agreement or to protect its intellectual property by any other means permitted by law. Licensee acknowledges and agrees that ASTM may imbed certain identifying or tracking information in the ASTM Products available on the Portal.

9. Passwords:
Licensee must immediately notify ASTM of any known or suspected unauthorized use(s) of its password(s), or any known or suspected breach of security, including the loss, theft unauthorized disclosure of such password or any unauthorized access to or use of the ASTM Product. Licensee is solely responsible for maintaining the confidentiality of its password(s) and for ensuring the authorized access and use of the ASTM Product. Personal accounts/passwords may not be shared.

10. Disclaimer of Warranty:
Unless specified in this Agreement, all express or implied conditions, representations and warranties, including any implied warranty of merchantability, fitness for a particular purpose or non-infringement are disclaimed, except to the extent that these disclaimers are held to be legally invalid.

11. Limitation of Liability:
To the extent not prohibited by law, in no event will ASTM be liable for any loss, damage, lost data or for special, indirect, consequential or punitive damages, however caused regardless of the theory of liability, arising out of or related to the use of the ASTM Product or downloading of the ASTM Documents. In no event will ASTM's liability exceed the amount paid by Licensee under this License Agreement.

12. General.

A. Termination:
This Agreement is effective until terminated. Licensee may terminate this Agreement at any time by destroying all copies (hard, digital or in any media)of the ASTM Documents and terminating all access to the ASTM Product.

B. Governing Law, Venue, and Jurisdiction:
This Agreement shall be interpreted and construed in accordance with the laws of the Commonwealth of Pennsylvania. Licensee agrees to submit to jurisdiction and venue in the state and federal courts of Pennsylvania for any dispute which may arise under this Agreement. Licensee also agrees to waive any claim of immunity it may possess.

(Video) KTA Lunch N' Learn Webinar on Adhesion for Everwebinar

C. Integration:
This Agreement is the entire agreement between Licensee and ASTM relating to its subject matter. It supersedes all prior or contemporaneous oral or written communications, proposals, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement. No modification of this Agreement will be binding, unless in writing and signed by an authorized representative of each party.

D. Assignment:
Licensee may not assign or transfer its rights under this Agreement without the prior written permission of ASTM.

E. Taxes.
Licensee must pay any applicable taxes, other than taxes on ASTM's net income, arising out of Licensee's use of the ASTM Product and/or rights granted under this Agreement.

FAQs

How do you test the adhesive strength of a tape? ›

PEEL ADHESION

To measure adhesion, tape is applied to a stainless steel panel. The tape is then removed. The force required to remove (or peel) the tape determines its adhesion level. The force is measured in ounces per one inch of tape.

Which tape is used for adhesion test? ›

The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard.

How do you perform an adhesion test? ›

To begin the adhesion test apply a uniform increasing force in accordance with your test method or

What is ASTM D3330? ›

ASTM D3330 is one of the more popular testing standards to determine the adhesive strength of pressure sensitive tapes. This unique standard consists of Methods A through F, identifying ways to measure peel adhesion with 180 degree and 90 degree peel methods.

What is tape testing? ›

A transparent adhesive (cellophane) tape test (sometimes called a "Scotch tape" test) refers to the collection and examination of a sample from the skin around the anus . This test is used to identify pinworms and pinworm eggs.

What is tape adhesive strength? ›

A protective tape offers the lowest adhesion – at around 10 ounces per inch – while a masking tape would be around 25-35 ounces per inch. A more difficult surface? You will need a higher adhesion level, perhaps even up to 45-60 ounces per inch.

What is ASTM D3363? ›

ASMT D3363 is a test method designed to evaluate the hardness of a coating through the use of pencil or drawing leads. The cure of the coating may also be assessed by this standard.

What is ASTM D4541? ›

ABSTRACT: ASTM D4541 is a standard test method that is used in order to evaluate the pull-off strength of air barrier membranes. This is a useful test when used to evaluate air barrier installations and set minimum standards to verify product performance and field installations under real conditions.

How do you measure BOPP tape quality? ›

Check the surface of the tape, including whether the two sides of the adhesive tape stick to the hand and whether there is a gap. The high-quality adhesive tape does not stick on both sides and there is no gap. Check whether there are bubbles on the surface of the tape.

Is standard for adhesion test? ›

ASTM D3359 is a standard test methods for measuring adhesion by tape test. This test assesses the adhesion of film coatings to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. This test method is also known as the Cross Hatch test.

How do you measure adhesion force? ›

The adhesive property can be obtained by directly measuring the adhesive force of a material of interest on a certain surface. In order to measure the adhesive force, the tensiometer can be used if the testing material can be obtained in a reasonable volume at low cost.

What is ASTM in paint? ›

ASTM's paint and related coating standards are instrumental in specifying and evaluating the physical and chemical properties of various paints and coatings that are applied to certain bulk materials to improve their surface properties.

What is ASTM d1000? ›

Break strength and elongation for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications at room or low temperatures. The tape is pulled apart in a universal testing machine while the force and change in length are measured.

What is ASTM d1002? ›

ASTM D-1002 determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen. The test is applicable for determining adhesive strength, surface preparation parameters, and adhesive environmental durability.

How accurate is the tape test? ›

The Army Tape Test is a method that has been used by the military for decades. Some studies date it back to the Navy in 1984. But perhaps that's the problem, the tape test does not always accurately reflect the body fat percentage of an individual. It can have a +/- 14% margin in both directions.

What is a wet tape test? ›

This method covers a procedure suitable for establishing acceptability of inter coat and surface adhesion of an organic coating system immersed in water. The procedure may be utilized as a production test.

What is the principle of the Scotch tape method? ›

During the period of extraintestinal migration, the adult female migrates out of the anal opening and deposits the eggs on the perianal skin, usually during the night. The eggs, and occasionally the adult female worms stick to the glued (sticky) surface of the cellulose tape.

Which tape is the strongest? ›

T-Rex's Brute Force Duct Tape is as tough as it gets. Seriously: a single piece of this tape was enough to hold over 200lbs of weight, much more than any other tape that we tested. T-Rex claims that, because of the very thick fabric backing and the double thickness of adhesive, it can hold up to 700lbs of weight.

How many types of tape are there? ›

The most common types of tape include masking tape, flooring tape, duct tape, electrical tape, packing tape, painter's tape and double sided or mounting tape. Other types of tape have specialized applications, such as surgical tape, hazard tape and gaffer's tape.

What is in adhesive tape? ›

What Are Adhesive Tapes Made Of? Adhesive tapes consist of a material called a backing or carrier (paper, plastic film, cloth, foam, foil, etc.), which is coated with an adhesive and a release liner if needed. The adhesive-coated backing or carrier is then wound up to form a long jumbo roll of tape.

What is ASTM D523? ›

ASTM D523 is a standard test method for specular gloss. It is a direct measurement taken with a “gloss meter”. Typically measurements will be taken on a flat, homogeneous and clean surface.

How is paint hardness measured? ›

One of the most common methods of determining coating hardness is the pencil hardness test, also known as the Wolff-Wilborn method, where a pencil of a known hardness is pushed across the coating at a specified angle, under a constant force.

What is a pencil hardness test? ›

The pencil hardness test, also referred to as the Wolff-Wilborn test, uses the varying hardness values of graphite pencils to evaluate a coating's hardness. The pencil hardness test is perhaps the most simple form of hardness test.

What is ASTM D4417 method C? ›

ASTM D4417-115 defines surface profile as, "the height of the major peaks relative to the major valleys". It describes 3 different measurement methods: Method A—profile comparators. Method B—depth micrometers. Method C—replica tape.

What is ASTM standard for tensile test? ›

ASTM D3039 tensile testing is used to measure the force required to break a polymer composite specimen and the extent to which the specimen stretches or elongates to that breaking point. Tensile tests produce a stress-strain diagram, which is used to determine tensile modulus.

When an adhesion test for a coating is performed what is the desired minimum pull strength in pounds per linear inch? ›

The coating specification itself required a minimum adhesion of 1,000 psi.

What is Micron in BOPP tape? ›

BOPP Brown Self Adhesive Tape, 65 Meter Length, 48 Mm Width, 40 Micron Thickness, 72 Rolls.

How does adhesive tape work? ›

How Does Tape Work? - YouTube

What is the density of BOPP film? ›

OTHER
UnitsBOPP
Densityg/cm 30,9
Test standard./.ASTM D 1505-68 Method C
Test condition./.23°C
Water absorption%< 0,1
2 more rows

How do you measure BOPP tape quality? ›

Check the surface of the tape, including whether the two sides of the adhesive tape stick to the hand and whether there is a gap. The high-quality adhesive tape does not stick on both sides and there is no gap. Check whether there are bubbles on the surface of the tape.

How can you test the strength of paper at home? ›

Testing the Strength of Paper (Testing Paper for Strength) - YouTube

Which brand of sticky tape is the strongest experiment? ›

Gorilla Tape

The test's champ: It took 85 pounds to break the Gorilla's back. Yet it still tore easily by hand, making for easy application. + Stickiness: The ape held its wires in place for a week--then showed off by pinning a 3-pound dumbbell to the wall over the weekend.

What is ASTM D3359? ›

ASTM D3359 is a standard test methods for measuring adhesion by tape test. This test assesses the adhesion of film coatings to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. This test method is also known as the Cross Hatch test.

What is Micron in BOPP tape? ›

BOPP Brown Self Adhesive Tape, 65 Meter Length, 48 Mm Width, 40 Micron Thickness, 72 Rolls.

How does adhesive tape work? ›

How Does Tape Work? - YouTube

How do you test the strength of a material? ›

The basic idea of a tensile test is to place a sample of a material between two fixtures called "grips" which clamp the material. The material has known dimensions, like length and cross-sectional area. We then begin to apply weight to the material gripped at one end while the other end is fixed.

How do you test the tensile strength of paper? ›

TAPPI T 456 is used to test the tensile strength of water saturated paper (wet tensile strength), and TAPPI T 220 is used to test pulp sheets. Manufacturers of paper goods need to evaluate the physical properties of their products to ensure they are able to function as intended.

How do you test quality of paper? ›

The grain can easily tested in practice by tearing the paper on the long and on the short side. If the paper tears relatively cleanly and in a straight line, it means it is torn in the machine direction. If the line is ragged and irregular, the paper has torn in the cross direction.

How many types of tape are there? ›

The most common types of tape include masking tape, flooring tape, duct tape, electrical tape, packing tape, painter's tape and double sided or mounting tape. Other types of tape have specialized applications, such as surgical tape, hazard tape and gaffer's tape.

What is the strongest kind of tape? ›

The Gorilla Tape was also among the strongest tapes in our adhesion strength test, second only to Gaffer Power.

What is the world's strongest tape? ›

700 Pounds of Strength

T-Rex® Brute Force® tape is designed for projects and challenges that require intense strength, durability and power, no matter the application. The tape is built with Forge-Link™ extreme tensile technology and one loop of tape can hold more than 700 pounds of weight.

Videos

1. 90 Degree Adhesive Peel Test by PackTest.com
(Packaging Testing Equipment by PackTest.com)
2. Dust test(ISO 8502-3)
(GoRae TV)
3. 7. Assessing the Result of a Pull-Off Adhesion Test
(Elcometer Inspection Equipment - Coatings Industry)
4. Adhesive Tape Testing
(Technibond)
5. How to do a cross-cut test according to ISO and ASTM
(BYKInstruments)
6. Must Know Transfer Tape Alternatives Hack for Vinyl with Cricut and Silhouette
(Creative Fabrica)
Top Articles
Latest Posts
Article information

Author: Wyatt Volkman LLD

Last Updated: 12/30/2022

Views: 5421

Rating: 4.6 / 5 (66 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Wyatt Volkman LLD

Birthday: 1992-02-16

Address: Suite 851 78549 Lubowitz Well, Wardside, TX 98080-8615

Phone: +67618977178100

Job: Manufacturing Director

Hobby: Running, Mountaineering, Inline skating, Writing, Baton twirling, Computer programming, Stone skipping

Introduction: My name is Wyatt Volkman LLD, I am a handsome, rich, comfortable, lively, zealous, graceful, gifted person who loves writing and wants to share my knowledge and understanding with you.